How to switch from 10GHz to 2.4GHz in Windows 5

Xiaobai Software  2023-06-24 15: 45  read 642 views

If you're looking for a quick and easy way to increase your internet speed, start with2.4GHzswitch to5GHzMight get you what you want.In Windows 10, as long as your computer supports5GHz, you can quickly do this through Device Manager.

So, how do you check if your computer supports 5GHz, and if so, how do you turn it on?Let's explore the answers to these questions.


How to check if your PC supports 10GHz on Windows 5

The first step in the process is to make sure your computer supports 5GHz.To do this, we can use the command prompt to do a quick and easy command:

1. In the Start menu search bar, search for Command Prompt and select Run as administrator.

2. In the command prompt window, enter netsh wlan show drivers.

3. Press the Enter key.


Now, look at the values ​​next to Supported Radio Types and compare what you see with the notes below.

802.11g and 802.11n.Your computer only supports2.4GHz.

802.11n, 802.11g, and 802.11b.Your computer only supports 2.4GHz.

802.11a or 802.11ac.If you can find these in the displayed values, your computer supports 5GHz.

NOTE: Before making any changes to your network adapter properties, please write down the default settings in case you make a mistake.

How to switch to 10GHz on Windows 5

Normally, your computer should have no problem deciding whether to use 2.4GHz or 5GHz.However, if you compare the 2.4GHz and 5GHz frequencies and decide you want to change your network band to 5GHz, here's how you can do it.

1. Click Start>Device Manager.Or use the Win+X keyboard shortcut, select Device Manager.

2. Select "View" > "Show Hidden Devices" to make sure Windows 10 shows all drivers.

3. Expand the list of network adapters.

4. Right-click on the Wi-Fi adapter > Properties.

5. Open the "Advanced" tab.

6. Set the property to Frequency Band or Preferred Frequency Band.This option can have different names, depending on the adapter manufacturer.

7. Using the drop-down menu below Value, select 5GHz.

8. Click "OK" to save the new changes.


How to force Windows 10 to use 5GHz

If there is no available band or preferred band option in the wireless adapter properties, you will have to force the change.Search for an option called VHT 2.4G in the property list.If VHT 2.4G is available, set the Value to Disable to turn off the 2.4GHz option and force your wireless adapter to switch to 5GHz.

If you can't find these options, your wireless adapter only supports 2.4GHz.As a last resort, you can try manually connecting to a 5GHz wireless network, or changing the frequency of your Wi-Fi router, but this will affect every device connected to it.

Test how 5GHz works for you

When it comes to using 2.4GHz or 5GHz, there is no immediate better choice. 5GHz should give you better internet speeds, while 2.4GHz works better when the signal has to pass through obstacles.However, you can use our guide to switching to 5GHz to see what works better for you.

Address of this article:
Copyright Notice:The article only represents the author's point of view, the copyright belongs to the original author, welcome to share this article, please keep the source for reprinting!